Payment & Shipping Terms:
sftp patch cable,
ftp patch cable
Cat6 UTP Patch Cable
Unifiber offers high quality cat6 network patch cable. Includes unshielded (UTP) and FTP (Foil twisted pair) and shielded (STP) configurations. Welcome to request a free quote or samples for quality evaluation.
Cat6 UTP Patch Cable, 100% Pure Copper, 23 AWG Stranded Cables
We feature our unshielded Cat6 Cable to deliver fast ethernet (10/100BASE-T) and Gigabit Ethernet (1000BASE-T) at 250MHz bandwidth. Ethernet Cat6 UTP patch cords are made of four twisted pairs of copper wire terminated with RJ45 plugs at both ends. Cat6 UTP cables are approved for up 100m (328 ft) distance. We highly recommend using patch cords for up to 20 ft distance.
Unifiber offer RJ45 Cat6 Ethernet Patch cable that can be connected using a punch-down, 110 block and modular connectors. Our Cat6 UTP Cable provides enhanced data transfer and lower crosstalk as compared to regular Cat5e cables.
We deliver with quality and integrity as our Cat6 UTP cables meet and exceed ANSI/TIA-568-C.2 standards. Furthermore, all our quality, low priced cords are UL Listed, ETL Verified and RoHS Compliant. We carry non-booted and snagless booted strain relief unshielded Cat6 cables with a variety of colors to choose from.
Cat6 Crossover UTP Patch Cable
Our Cat6 UTP crossover patch cable is ideal for connecting PC to PC without hubs or switches. These are typically seen in network devices where two or three devices are connected directly. These have TIA/EIA 568A termination on one end and TIA/EIA 568B termination on the other.
Cat6 UTP Ethernet Patch Cable, Non-Booted Crimped/Assembly Style
Construction of Unifiber Cat6 Non-Booted Patch Cord
Our Cat6 Non-booted UTP cables are constructed by stripping the cable into the standard patch cable length, and a 50-micron, gold-plated RJ45 connector is crimped unto the wires. A load bar is used to separate the cables and reduce crosstalks.
Our non-booted Cat6 UTP patch cables are ideal for cramped up spaces where space-saving is a great deal. These are also ideal for simple applications and its more cost efficient than our booted cables.
You can easily install these cables in home and office applications, in modems, routers, servers, hubs, printers, switch boxes, gaming console, VoIP, computers and many more. Plus, our Ethernet Cat6 UTP cables are compatible with computer devices such as routers, patch panels, modems, switches and hubs.
Cat6 Molded Snagless Boot, Strain-Relief UTP Patch Cables
Construction of Unifiber Cat6 UTP Snagless Boot Patch Cord
Our Unshielded Cat6 Snagless, molded strain relief boot is made by injection molding, where the jacket material of the cable is pushed right into the connector and around the individual wires. They are designed with secure and efficiently constructed release tabs.
In this way, the cable and connector is protected and dislodging of the RJ45 connector from the cable is less likely to happen as the molded boot provides strain relief support for the RJ45 connectors.
Cat6 UTP with snagless boot, RJ45 connectors Patch Cable is best for applications requiring frequent connection and disconnection from the source in many data centers.
Conductors: 24AWG or 26AWG or 28AWG stranded bare copper.
Ripcord: under jacket
Jacket: pvc or LSZH
Standards: UL444/CSA-C22.2 No 214,Type CM
EIA/TIA-568A and EIA/TIA-568B.2,Horizontal cableApplications: internet,computer
UTP: unscreen cable
STP : single shielding Network cable ,Mylar tape,Aluminum-mylar tape and Drain wire
SFTP: Double shielding cable,Mylar tape,Aluminum-Mylar tape and drain wire and bare or tinned copper braid
Network cable Connector detail specification:
|ANSI/TIA/EIA-568-C.2||T568A & T568B|
|ISO/IEC 11801||8-position conductor/pair assignment (1-2/3-6/4-5/7-8)|
|Pair Identification||Pair1= Blue/White Pair2= Orange/White Pair3= Green/White Pair4= Brown/White|
|Transmission Performance||NSI/TIA-568-C.2: category 7 (1-750 MHz) specifications|
|Constructor||4 pairs, 7 strands,26 AWG, SSTP (PiMF)|
|Cable Type||UTP Cat.6 Crossover Patch Cord|
|Outer Cable Diameter||6.0mm ± 0.2 mm|
|Outer Jacket||PVC/LSZH Jacket|
|Type||Shielded RJ45 8P8C Modular Plug|
|Housing||UL listed 94V-0/1/2 flame retardant polycarbonate|
|IDC blades||phosphor bronze, gold plating over 100 μin of nickel in contact area|
Contact Person: Kerry Sun