Payment & Shipping Terms:
sftp patch cable,
weatherproof cat6 cable
Cat6a Patch Cable
Cat6A UTP Patch Cable, Pure 100% Copper, 23 AWG Stranded Cable
If we are talking about a greater bandwidth and faster network speed than Cat6 UTP, then Cat6A UTP is the next-in-line option you can get. Cat6A UTP Patch cable is best unshielded copper cabling solution for doubling your Ethernet bandwidth capabilities of up to 500 MHz. It’s an unshielded augmented Cat6 cable that is designed for huge crosstalk elimination and ANEXT elimination.
Our Cat6 UTP Ethernet Patch cables are terminated with RJ45 plugs, connected to a punch-down 110 block. We deliver with quality and signal integrity in our Cat6A UTP cables, meeting and exceeding ANSI/TIA-568-C.2 standards.
Here at Unifiber we offer low priced cords that are UL Listed, ETL Verified and RoHS Compliant. We have options for you to choose from for our line of Cat6A UTP cables such as non-booted and snagless boot strain relief cables, available in a variety of colors.
Cat6A Crossover UTP Patch Cable
Cat6A UTP crossover patch cables are meant to be connected without the help of hubs and switches. These are typically seen in network devices where two or three devices are connected directly. Our Cat6A UTP crossover patch cords have TIA/EIA 568A termination on one end and TIA/EIA 568B termination on the other.
Cat6A UTP Ethernet Patch Cable, Non-Booted Crimped/Assembly Style
Construction of Unifiber Cat6A Non-Booted Patch Cord
Our Cat6A Non-booted UTP cables are constructed by stripping the cable into the standard patch cable length, and a 50-micron, gold-plated RJ45 connector is crimped unto the wires. A load bar is used to separate the cables and reduce crosstalks.
Unifiber offer non-booted Cat6A UTP patch cables ideal for populated network spaces where space-saving is a great deal. These are also ideal for simple applications and its more cost efficient than our booted cables.
You can easily install these cables in home and office applications, in modems, routers, servers, hubs, printers, switch boxes, gaming console, VoIP, computers and many more. Plus, our Ethernet Cat6A UTP cables are compatible with computer devices such as routers, patch panels, modems, switches and hubs.
Cat6A Molded Snagless Boot, Strain-Relief UTP Patch Cables
Construction of Unifiber Cat6A UTP Snagless Boot Patch Cord
Our Unshielded Cat6A Snagless, molded strain relief boot is made by injection molding, where the jacket material of the cable is pushed right into the connector and around the individual wires. They are designed with secure and efficiently constructed release tabs.
With much consideration taken into designing the perfect snagless boot Cat6A UTP cables, easy dislodging of the RJ45 connector is less likely. The molded boots provide protection and strain relief support for the RJ45 connectors.
Cat6A UTP with snagless boot, RJ45 connectors Patch Cable is best for applications requiring frequent connection and disconnection from the source in many data centers.
Conductors: 24AWG or 26AWG stranded bare copper.
Ripcord: under jacket
Jacket: PVC or LSZH
Standards: UL444/CSA-C22.2 No 214,Type CM
EIA/TIA-568A and EIA/TIA-568B.2,Horizontal cableApplications: internet, computer
UTP: unscreen cable
STP : single shielding Network cable ,Mylar tape,Aluminum-mylar tape and Drain wire
SFTP: Double shielding cable,Mylar tape,Aluminum-Mylar tape and drain wire and bare or tinned copper braid
Network cable Connector detail specification:
|ANSI/TIA/EIA-568-C.2||T568A & T568B|
|ISO/IEC 11801||8-position conductor/pair assignment (1-2/3-6/4-5/7-8)|
|Pair Identification||Pair1= Blue/White Pair2= Orange/White Pair3= Green/White Pair4= Brown/White|
|Transmission Performance||NSI/TIA-568-C.2 category 7 (1-750 MHz) specifications|
|Constructor||4 pairs, 7 strands,28 AWG, SFTP|
|Cable Type||SSTP Cat.7 Patch Cable|
|Outer Cable Diameter||6.0mm ± 0.2 mm|
|Outer Jacket||PVC/LSZH Jacket|
|Type||Shielded RJ45 8P8C Modular Plug|
|Housing||UL listed 94V-0/1/2 flame retardant polycarbonate|
|IDC blades||phosphor bronze, gold plating over 100 μin of nickel in contact area|
|Retention||50 N (11 lbf) for 60±5 s|
|Mating cycle life||min 750 cycles|
|Tensile strength||≥ 20 N per wire|
|Installation Temperature||0°C to +60°C|
|Operating temperature||-20°C to +60°C|
|Minimum bend radius||4 outer cable diameters|
|Boot Type||Any type of the above picture|
|Length||0.3m-30m or As per requested|
|Package||polybag or Blister Package|
Contact Person: Kerry Sun